Cool Mode - Sharp CV -P09FX Installation And Operation Manual

COOL MODE

1
Install the exhaust hose (See Page16), turn
the drainage nozzle to the CLOSE position,
and check the drainage nozzle is covered
Drainage nozzle
with the stopcock.
"CLOSE" position
Stopcock
1
3
2
3
2
3
1
4
4
TO TURN OFF
Press the POWER button again.
• The red OPERATION lamp on the unit will turn
E-20
Press the MODE button to select COOL
mode.
COOL DEHUM
Press the POWER button to start op-
eration.
• The red OPERATION lamp on the unit will
light.
Press the TEMPERATURE button to set
the desired temperature.
• The temperature can be set within the range
of 64°F to 86°F.
Press the FAN button to set the de-
sired fan speed.
AUTO QUIET
off.
FAN VENT
LOW HIGH