Setting The Orientation Of The Text On The Card Edge Display; Resetting Factory Defaults - evertz 7707CVR-8 Series Manual

7700 MultiFrame Manual
7707CVR-8 Eight Analog Video Fiber Receiver

4.2.9. Setting the Orientation of the Text on the Card Edge Display

The DISP display option allows the user to set a horizontal or vertical orientation for the card edge display
messages. To set the display orientation, select the CTRL menu item in menu level 1, then use the toggle
switch to display the DISP menu selection and use the pushbutton to select it. Use the toggle switch to
change between HOR and VERT. Press the pushbutton to make your selection.
CTRL
DISP
HORZ
VERT

4.2.10. Resetting Factory Defaults

The FRST menu option will return the 7707CVR-8 to factory defaults. To return all settings to factory
defaults, select the CTRL menu item in menu level 1, then use the toggle switch to display the FRST menu
selection and use the pushbutton to select it. Use the toggle switch to change between YES and NO.
Press the pushbutton to make your selection.
CTRL
DISP
YES
NO
7707CVR-8 - 12
This control enables the user to select the display orientation.
Horizontal display used when the module is housed in the 1 rack
HOR
unit 7701FR frame or the stand-alone enclosure.
Vertical display used when the module is housed in the 3-rack unit
VERT
7700FR frame.
This control enables the user to reset the setting to factory default.
Return all card settings to factory default.
YES
Retain current settings. Abort the factory reset operation.
NO
Revision 1.0