Table of Contents
Advertisement
2.
INSTALLATION
The 7707CVR-8 comes with a companion rear plate that has eight BNC connectors and one SC/PC,
ST/PC or FC/PC optical connector. For more information on mounting the rear plate and inserting the
module into the frame see section 3 of the frame chapter.
FIBER INPUT:
SC/PC, ST/PC or FC/PC female connector. This wide range input accepts optical
wavelengths of 1270nm to 1610nm for standard, CWDM or DWDM transmission schemes.
Do not hook up the 7707CVT-8 series DWDM cards and any 7707CVR-8 series cards
directly with a short fiber optic cable. The 7707CVT-8 series DWDM card produces
+7dBm of power, which will damage the receiver if connected directly.
Do not hook up the 7707CVT-8 series cards that output more than -7dBm of power
(see 7707CVT-8 series specifications for output power of various laser types) and
7707CVR-8 series high sensitivity (-H versions) receiver cards directly with a short
fiber optic cable. The 7707CVT-8 series cards that produce more than -7dBm of
power will damage the receiver if connected directly.
Figure 2-1: 7707CVR-8 Rear Panels
Revision 1.0
7700 MultiFrame Manual
7707CVR-8 Eight Analog Video Fiber Receiver
7707CVR-8 - 3
Advertisement
Table of Contents
