Setting The Dc Offset; Setting The Password For Channel Blocking And Selecting Channels To Be Blocked - evertz 7707CVR-8 Series Manual

4.2.7. Setting the DC Offset

The DC Offset control is used to set the DC offset level of the video output on the 7707CVR-8. The
display shows a range of offset values from 0 Volts, expressed in millivolts.
To set the DC Offset, select the CTRL menu item in menu level 1, select VID from menu level 2, then
select DC. Use the toggle switch to select the desired video channel DC offset (from VID1 to VID8) and
press the pushbutton to select it. Use the toggle switch to set the gain value of VID1 to VID8.
CTRL
VID
DC
VID1
-100 to +100

4.2.8. Setting the Password for Channel Blocking and Selecting Channels to be Blocked

The 7707CVR-8 allows selective blocking of video channels 1 to 8 with a password. The default password
is 7154.
To view the menu for channel blocking, use the pushbutton to select the CTRL menu item in menu level 1,
then use the pushbutton to select PSWD from menu level 2. Use the toggle switch to cycle through
password 0...9999. Use the pushbutton to enter the password shown on the display in menu level 3.
CTRL
PSWD
0-9999
VCH1
VCH2
VCH3
VCH4
VCH5
VCH6
VCH7
VCH8
EN
DIS
Without the correct password, the blocking or enable setting of each channel cannot
be changed. The current Block or Enable status can only be viewed in menu level 5.
This control enables the user to set the DC offset level of the video output.
DC Offset range, describing a mV (millivolt) value
-100 to +100
In menu level 4 use the toggle switch and then pushbutton to select the
following:
Enter a new password 0...9999
PWSL
Select Video Input 1
VCH1
Select Video Input 2
VCH2
Select Video Input 3
VCH3
Select Video Input 4
VCH4
Select Video Input 5
VCH5
Select Video Input 6
VCH6
Select Video Input 7
VCH7
Select Video Input 8
VCH8
To enable or disable blocking, select the video channel (VCH1 to VCH8)
menu item in menu level 4.
parameter in menu level 5 of VCH1 to VCH8 individually.
Enable Channel
EN
Block Channel
BLOK
Revision 1.0
7700 MultiFrame Manual
7707CVR-8 Eight Analog Video Fiber Receiver
Use the toggle switch to set the blocking
7707CVR-8 - 11