Overview - evertz 7707CVR-8 Series Manual

1.

OVERVIEW

The 7707CVR-8 is a VistaLINK
video signals. This single card module accepts a fiber optic input from the companion 7707CVT-8
composite analog video fiber transmitter, demultiplexes the signals, performs D to A conversion and
outputs NTSC or PAL analog video.
The 7707CVR-8 occupies two card slots and can be housed in a 1RU frame which will hold up to 3
modules, a 3RU frame which will hold up to 7 modules, a 350FR portable frame which holds up to 3
modules, or a standalone enclosure which will hold 1 module.
Features:
Single card fiber optic receiver for up to eight analog video signals
Supports both NTSC and PAL video signals
Broadcast quality analog video performance
Meets or exceeds EIA/TIA RS250-C short haul specifications for analog video transport
Adjustable gain, DC offset and pre-emphasis for up to 250m of Belden 1694A coaxial cable
Comprehensive signal and card status monitoring via four digit card edge display or remotely
through SNMP and VistaLINK
VistaLINK capability is available when modules are used with the 3RU 7800FR or 350FR portable
®
frame and a 7700FC VistaLINK
Fully hot-swappable from front of frame with no fiber disconnect/reconnect required
Supports single-mode and multi-mode fiber optic cable
Accepts any wavelength in the 1270nm to 1610nm range
-capable, composite analog video fiber receiver for broadcast quality
®
®
Frame Controller module in slot 1 of the frame
®
Revision 1.0
7700 MultiFrame Manual
7707CVR-8 Eight Analog Video Fiber Receiver
7707CVR-8 - 1