Download Print this page

Horn Tools HJIMRR02FIT Mounting Instructions page 6

Advertisement

Technische Änderungen vorbehalten / technical changes reserved
2.
Montagefüße | mounting feet
Fahrzeuge mit Kantenschutz über Dachreling | cars with protection strip over
roof railing
Kantenschutz montiert / protection strip in place
Abb.02
Wenn Dein Fahrzeug mit dem in Abb.02 gezeigten Kantenschutz ausgestattet ist muss dieser demontiert werden!
Dazu Endkappen abnehmen (Abb.02: B), mit Schraubendreher Kantenschutz vorsichtig aushebeln und abziehen
(Abb.03.). Auf beiden Fahrzeugseiten durchführen! Endkappen wieder anbringen.
If your car is fitted with a protection strip ofer the roof raling this has to be demounted! To do so, gently pull off the
endcaps, then using a screwdriver lift the protection strip over the edge with care and pull it off gently, like shown
in Abb.03. Do this on both sides of the car. Then attach the endcaps again.
Datum / date:
16.12.2021
Abb.03
Kantenschutz hier aushebeln /
lift protection strip here
B
Seite / page:
6
12
|

Advertisement

loading