Indiana Furniture 620-000GB Attachment Assembly Instructions

Attachment:
For units w ithout 'P linth' option skip to page # 2
Note: These instructions only show how to attach the 620-
000GB kit to the arm sides of a chair. For attaching the kit to
an ottoman please see the appropriate ottoman instructions.
For all chairs: the 2-prong side of the ganging brackets always
goes on the right side of the chair (when facing the front).
The 'L' bracket side always goes on the left side of the chair.
Note: Images shown are for clarity purposes only and may not match the unit that you are currently ganging together.
Page 1 of 4 Proper product assembly is the responsibility of the installing agent. If you have any questions concerning these instructions, please contact Customer Service.
620-000GB Attachment Assembly Instructions
Plush Lounge
With Plinth:
1
Start by flipping the chair over.
2
Attach the 'L' brackets to the appropriate holes on the
left side of the plinth. Use the #8 x 1-1/2" long screws
to attach the brackets.
3
Attach the 2-prong part of the ganging brackets to the
appropriate holes on the right side of the plinth. Use
the #8 x 1-1/2" long screws to install the brackets.
4 Flip the chair back upright. This chair is ready for
See General Ganging Instructions.
ganging.
800-422-5727
www.IndianaFurniture.com