Advertisement
Quick Links
Parts List:
Qty (3) Short Tops
Qty (8) Jointer Plates
Hardware Included
5
(4) Bags of #10 x
" Flat Head Screws
8
(2) Bag of #6 x ½" Pan Head Screws
(1) Bag of ¼"-20 x 2" Bolt and ¼"-20 Nuts
(1) 29mm Silver Polycom Grommet
(18) Cover Caps (Optional)
One 10: 5 Piece Conference Table Assembly Instructions 144" to 192" Lengths
Qty (4) Long Tops
Qty (16) Jointer Bolts
(2) People
Drill with phillips screw bit
5"
Allen Wrench
32
(Optional)
5mm Allen Wrench
10mm Wrench
Level
1" Hole Saw Bit for Polycom Grommet
2298-1105P144192 5 Pc Conference Table assembly instructions. 144" to 192"
Qty (2) Trough Assembly
Short L-Brackets
Tools Required
(Optional)
Qty (2) Accent Covers
Long L-Brackets
Qty (2) Bases
Qty (1) Mid Leg
1
Advertisement
Related Manuals for Indiana Furniture One 10 Conference Table
Summary of Contents for Indiana Furniture One 10 Conference Table
- Page 1 One 10: 5 Piece Conference Table Assembly Instructions 144” to 192” Lengths Parts List: Qty (2) Accent Covers Qty (4) Long Tops Qty (3) Short Tops Qty (2) Trough Assembly Short L-Brackets Long L-Brackets Qty (8) Jointer Plates Qty (16) Jointer Bolts Hardware Included Tools Required ...
- Page 2 Step 1: Remove the accent cover off of the bases by pulling it off.Then bolt together (1) Base and (1) Mid Leg to (1)Trough assembly using the ¼”-20 x 2” Bolt and ¼”-20 Nuts. Next, Bolt the remaining Trough Assembly to the remaining Base Next screw on the Short L-Brackets and the Long L-Brackets using the #6 x ½” Pan Head Screws. If the table is 48”...
- Page 3 Step 2: Place one short end on the end of the Trough Assembly and fasten it to the L-Brackets using #6 x ½” Pan Head Screws. Center the Top from left to right and align the Top flush with the outside of the base. Center Top with the Trough Assembly 2298-1105P144192 5 Pc Conference Table assembly instructions.
- Page 4 Make Top Flush with the outside of the base as shown. Step 3: While keeping the outside and top surfaces flush, conenct the remaining tops using the 10mm wrench and the provided Jointer Bolts. Now, fasten the tops to the L- Brackets with the #6 x ½”...
- Page 5 5" Step 4: Adjust the worksurfaces using the adjustment set screws in the Jointer Plates with the Allen Wrench Fine Tune Adjustment Set Screws Step 5: Level the table using the 5mm Allen Wrench Levelers Are Here Levelers Are Here 2298-1105P144192 5 Pc Conference Table assembly instructions.
- Page 6 Step 6: Place the Accent in the table, adjust the height of the Accent Cover by using the adjusable levlers on the bottom of the Accent Cover Step 7: Push on the Base Accent Panels from Step 1 Optional Step 8: Using a 1” Hole Saw Bit, drill a hole in the Accent Cover for the Optional Silver Polycom Grommet. Bore Hole for Silver Polycom Grommet (Optional) Push on Base Accent Panels 2298-1105P144192 5 Pc Conference Table assembly instructions.