Summary of Contents for Indiana Furniture One 10 Standard Top Conference Table
Page 1
One 10: Standard Top Conference Table Assembly Instructions 144” to 192” Lengths Parts List: Qty (2) Tops Qty (2) Trough Assembly Qty (1) Mid Leg Qty (2) Bases Short L-Brackets Qty (2) Jointer Plates Qty (4) Jointer Bolts Long L-Brackets Hardware Included Tools Required ...
Page 2
Step 1: Remove the accent cover off of the bases by pulling it off.Then bolt together (1) Base and (1) Mid Leg to (1)Trough assembly using the ¼”-20 x 2” Bolt and ¼”-20 Nuts. Next, Bolt the remaining Trough Assembly to the remaining Base Next screw on the Short L-Brackets and the Long L-Brackets using the #6 x ½” Pan Head Screws. If the table is 48”...
Page 3
Step 2: While keeping the outside and top surfaces flush, conenct the remaining top using the 10mm wrench and the provided Jointer Bolts. Be sure to center the Tops to the width and the length of the trough assembly. Now, fasten the tops to the L-Brackets with the #6 x ½” Pan Head Screws. Next fasten the Jointer Plates to the Tops using #10 x 7/8” Flat Head Screws.
Page 4
5" Step 3: Fine tune adjust the worksurfaces using the adjustment set screws in the Jointer Plates with the Allen Wrench Fine Tune Adjustment Set Screws Step 4: Next, level the table using the 5mm Allen wrench. Levelers Are Here Levelers Are Here 2298-1102P144192 Standard Top Conference Assembly Instructions.
Page 5
Step 5: Push on Base Accent Panels from Step 1 Push Accent Panels On 2298-1102P144192 Standard Top Conference Assembly Instructions. 144" to 192"...