Advertisement
Quick Links
Ganging:
Note: These instructions only apply to 620-3333CGT & 620-
3333CGTT.
Start by laying the chairs that are going to be ganged
1
to the table on their back.
Attach the metal ganging plates to the chair, as
shown, with the smaller slots on the chair side. Use
the 1-1/2" long bolts to attach the plate to the chair.
Do not fully tighten the bolts yet. Leave them
loose for final adjustments.
Note: Images shown are for clarity purposes only and may not match the unit that you are currently ganging together.
Page 1 of 4
Proper product assembly is the responsibility of the installing agent. If you have any questions concerning these instructions, please contact Customer Service.
Corner Table Ganging Assembly Instructions
Plush Lounge
2
Position the table next to the first chair to be
ganged.
Note: Make sure the insert nuts for the second chair
are oriented in the correct direction for the desired
layout.
Second Chair to
gang to this side
800-422-5727
www.IndianaFurniture.com
Advertisement
Related Manuals for Indiana Furniture 620-3333CGT
Summary of Contents for Indiana Furniture 620-3333CGT
- Page 1 Plush Lounge Corner Table Ganging Assembly Instructions Ganging: Position the table next to the first chair to be Note: These instructions only apply to 620-3333CGT & 620- ganged. 3333CGTT. Note: Make sure the insert nuts for the second chair Start by laying the chairs that are going to be ganged are oriented in the correct direction for the desired to the table on their back.
- Page 2 Plush Lounge Corner Table Ganging Assembly Instructions Attach the table to the metal ganging plates. Repeat step 1 for the second chair to be ganged. For units without the Plinth option use ¾” long bolts. For units with the Plinth option use 1-1/2” long bolts. Once all the bolts are started, push the units together and tighten all 12 bolts holding on the ganging brackets.
- Page 3 Plush Lounge Corner Table Ganging Assembly Instructions Push the second chair up to the assembled unit. Use a short screwdriver or a right-angle drill to install the Make sure to align the holes on the brackets with the bolts into the bottom of the table. inserts in the table.
- Page 4 Plush Lounge Corner Table Ganging Disassembly Instructions Disassembly: Pull the units apart and rotate them onto their backs. Use a short screwdriver or a right-angle drill to remove the bolts from the bottom on one side of the table. Remove the ganging plates by removing all bolts from the table &...