Advertisement
Quick Links
Parts List:
Qty (2) Short Tops
Qty (4) Jointer Plates
Hardware Included
Bag of #10 x 3/4 " Pan Head Screws
•
Bag of ¼"-20 x 2-3/8" Bolt and ¼"-20 Nuts
•
(1) 29mm Silver Polycom Grommet
•
•
(12) Cover Caps
(Optional)
One 10 Block: 5 Piece Conference Table Assembly Instructions 96" to 120" Lengths
Qty (2) Long Tops
Qty (8) Jointer Bolts
•
•
•
(Optional)
•
•
•
•
Qty (1) Trough Assembly
Short L-Brackets
Tools Required
(2) People
Drill with phillips screw bit
5/32" Allen Wrench
5mm Allen Wrench
10mm Wrench
Level
1" Hole Saw Bit for Polycom Grommet
Qty (1) Accent Cover
Long L-Brackets
(Optional)
Qty (2) Bases
Indiana Furniture 1
Advertisement
Related Manuals for Indiana Furniture One 10
Summary of Contents for Indiana Furniture One 10
- Page 1 One 10 Block: 5 Piece Conference Table Assembly Instructions 96” to 120” Lengths Parts List: Qty (1) Accent Cover Qty (2) Short Tops Qty (2) Long Tops Qty (1) Trough Assembly Short L-Brackets Long L-Brackets Qty (4) Jointer Plates Qty (8) Jointer Bolts...
- Page 2 Cover Caps, cover the outside holes on the base. Place Cover Caps here on 48” wide tables Base With Accent Cover Base With Accent Cover Removed Bolt Trough Assembly together in (4) places Screw Short and Long L-Brackets on the Trough Assembly Indiana Furniture 2...
- Page 3 Place one short end on the end of the Trough Assembly and fasten it to the L-Brackets using #10 x 3/4” Pan Head Screws. Center the Top from left to right and align the Top flush with the outside of the base. Center Top with the Trough Assembly Make Top Flush with the outside of the base as shown. Indiana Furniture 3...
- Page 4 While keeping the outside and top surfaces flush, conenct the remaining tops using the 10mm wrench and the provided Jointer Bolts. Now, fasten the tops to the L- Brackets with the #10 x 3/4” Pan Head Screws. Next fasten the Jointer Plates to the Tops using #10 x 3/4” Pan Head Screws. Jointer Plate Place Jointer Bolts in 1 then Fasten the Jointer Plates Indiana Furniture 4...
- Page 5 Step 4: Level the table using the 5mm Allen Wrench Levelers Are Here Levelers Are Here Step 5: Place the Accent in the table, adjust the height of the Accent Cover by using the adjusable levlers on the bottom of the Accent Cover Indiana Furniture 5...
- Page 6 Step 6: Push on the Base Accent Panels and insert thumb screws from Step 1 Optional Step 10: Using a 1” Hole Saw Bit, drill a hole in the Accent Cover for the Optional Silver Polycom Grommet. Bore Hole for Silver Polycom Grommet (Optional) Indiana Furniture 6...