Indiana Furniture One 10 Block 4 Piece Conference Table Assembly Instructions

96” to 120” lengths

Download this manual

Parts List:

Qty (2) Short Tops

Qty (4) Jointer Plates

Hardware Included

Bag of #10 x 3/4 " Pan Head Screws

•

Bag of ¼"-20 x 2-3/8" Bolt and ¼"-20 Nuts

•

(12) Cover Caps

•

(Optional)

One 10 Block: 4 Piece Conference Table Assembly Instructions 96" to 120" Lengths

Qty (2) Long Tops

Qty (8) Jointer Bolts

•

Qty (1) Trough Assembly

Short L-Brackets

Tools Required

(2) People

Drill with phillips screw bit

10mm Wrench

5/32" Allen Wrench

5mm Allen Wrench

Level

Qty (2) Jointer Plates

Long L-Brackets

Qty (2) Bases

Indiana Furniture 1

Page 1 Bag of ¼”-20 x 2-3/8” Bolt and ¼”-20 Nuts • Drill with phillips screw bit • (12) Cover Caps 10mm Wrench • • (Optional) 5/32” Allen Wrench • 5mm Allen Wrench • Level • Qty (2) Bases Indiana Furniture 1...
Page 2 Cover Caps, cover the outside holes on the base. Place Cover Caps here on 48” wide tables Base With Accent Cover Base With Accent Cover Removed Bolt Trough Assembly together in (4) places Screw Short and Long L-Brackets on the Trough Assembly Indiana Furniture 2...
Page 3 Head Screws. Center the Top from left to right and align the Top flush with the outside of the base. Attach Jointer Plate Center Top with the Trough Assembly Make Top Flush with the outside of the base as shown. Indiana Furniture 3...
Page 4 While keeping the outside and top surfaces flush, conenct the remaining tops using the 10mm wrench and the provided Jointer Bolts. Now, fasten the tops to the L- Brackets with the #10 x 3/4” Pan Head Screws. Next fasten the Jointer Plates to the Tops using #10 x 3/4” Pan Head Screws. Place Jointer Bolts in 1 then Fasten the Jointer Plates Jointer Plate Indiana Furniture 4...
Page 5 Step 4: Level the table using the 5mm Allen Wrench Levelers Are Here Levelers Are Here Step 5: Push on the Base Accent Panels and insert thumb screws from Step 1 Push Accent Panels On Indiana Furniture 5...