Note: These instructions apply to all Isla bistro tables.
1
First start by unpacking the chair, tabletop, & legs
from the box.
2
Lay the tabletop upside down onto a soft surface so it
doesn't scratch the top. Have the pilot holes facing up.
3
Attach the legs to the top as shown using the #10 x
¾" screws. Please note the direction of the leg in
relation to the holes circled below.
Page 1 of 2
Proper product assembly is the responsibility of the installing agent. If you have any questions concerning these instructions, please contact Customer Service.
Isla Lounge
Bistro Table Assembly Instructions
4
Align the top to the vertical panel attached to the chair.
Attach the top to the L-brackets with #8 x 5/8" screws.
Align the pilot holes in the top with the brackets.
Attach the legs to the bottom of the vertical panel using
Summary of Contents for Indiana Furniture Isla Lounge Bistro Table
Page 1
Isla Lounge Bistro Table Assembly Instructions Assembly: Align the top to the vertical panel attached to the chair. Note: These instructions apply to all Isla bistro tables. Attach the top to the L-brackets with #8 x 5/8” screws. Align the pilot holes in the top with the brackets. First start by unpacking the chair, tabletop, &...
Page 2
Isla Lounge Bistro Table Assembly Instructions Hardware Replacement: Repeat steps 1 & 2 for the remaining 3 bolts. Do this Note: These instructions apply to all Isla bistro tables. process one bolt at a time. This is for replacing the nickel hardware on the vertical panel with the optional black hardware shipped with the chair.