Emerson PACSystems RX3i User Manual page 40

User Manual
GFK-2911E
Table 8:
Parameter
mComreq_Setup[26]
mComreq_Setup[27]
mComreq_Setup[28]
mComreq_Setup[29]
mComreq_Setup[30]
mComreq_Setup[31]
A digital output is defined as a DNP3 Object (Outputs) 10 Var 2 poll response. PLC memory
type, memory address, and number of objects are required to be entered. Set values for
these parameters as required by the application.
Note:
Table 9:
Parameter
mComreq_Setup[32]
mComreq_Setup[33]
mComreq_Setup[34]
mComreq_Setup[35]
mComreq_Setup[36]
mComreq_Setup[37]
The Definition of the Address Value for Digital memory is word (16-bit) bounded. When
presented with a non-word bounded address, the EDS001 module rounds the presented
address down to the nearest word boundary. No alarm is created when such an adjustment
is made.
The number of DI objects is byte-bounded. The EDS001 module rounds up to the nearest
byte. For example, trying to define 22 DI objects will result in 24 being assigned.
The actual address and number of items being queried for Digital inputs and/or outputs can
be seen in the response to the STAT A command in the Station Manager interface.
Configuration of DNP3 outstation Parameters
Value
m-type value
0
address value
0
number value
0
by setting the Memory type to 0, the Object is disabled.
Value
m-type value
0
address value
0
number value
0
Description
Memory Type for DI Polled Objects
Value (decimal): 70-%I, 72-%Q, 76-%M, 74-%T, 86-%G, 0-
unused
Reserved
Memory Address for DI Polled Objects Value: 1 to
maximum (based on memory type)
Reserved
Number of DI Polled Objects
Value: 1 to 3000
Reserved
Description
Memory Type for DO Polled Objects
Value (decimal): 70-%I, 72-%Q, 76-%M, 74-%T, 86-%G, 0-
unused
Reserved
Memory Address for DO Polled Objects.
Value: 1 to maximum (based on memory type)
Reserved
Number of DO Polled Objects
Value: 1 to 3000
Reserved
Chapter 6
Sep 2019
34