Clear The Memory Of The Reader; Set Clock; Adjust Display Contrast - Cirrus Research doseBadge CR:112A User Manual

Clear the memory of the Reader

The memory of the RC:112A Reader unit can be cleared when required. Please
ensure that all measurements have been downloaded to the doseBadge
Database before clearing the memory.
To clear the memory, access the menu by pressing the Menu button and select the
Clear Memory option.

Set Clock

The RC:112A Reader unit has a clock and calendar which is used to stamp the
measurement with the current time and date. It is vital that the time and date of the
clock in the Reader unit is correct. To check the current time and date, press the menu
button to enter the menu options. If the Reader time and time is not set then the
display shows "Please set clock"
The default time format in the Reader Unit is hh:mm:ss and the default date format
dd/mm/yy. However, the dBLink3 software allows the user to change these to suit the
country where the doseBadge will be used. Please refer to the dBLink3 software for
further details.

Adjust Display Contrast

CR:112A & CR:112AIS doseBadge User Manual
The current Time and Date are
shown at the bottom of the
display. If the Time and Date
are not correct, press the OK
button to enter the Clock Set
menu.
The contrast of the LCD display
can be adjusted to
accommodate different
ambient light conditions. To
change the contrast of the LCD
display, press the OK key on
either the Lighter or Darker
options.
Page 31