Table of Contents
Advertisement
Page 26
Checking the Calibration of the doseBadge
The calibration of the doseBadge can be checked by removing the unit from the wearer
and performing the same calibration procedure as described above. This records the
second calibration value into the doseBadge. Insert the doseBadge into the Acoustic
Calibrator on the Reader unit, ensuring that the InfraRed Port on the Reader is aligned
with the InfraRed window on the doseBadge.
The second calibration does not affect the measurement information and is used for
information only.
The Reader will display the calibration information until a key is pressed.
CR:112A & CR:112AIS doseBadge User Manual
Press the Cal button to
perform the second calibration.
The Reader will show the
status of the communication
between the doseBadge and
the Reader on the display.
Advertisement
Table of Contents
