Page 10
CR:112A & CR:112AIS dosebadge
The layout of the CR:112A &
CR:112AIS doseBadge is
shown on the right. Please
note that this is a
representation of the
doseBadge and details
shown may differ from
production items.
The microphone capsule is
mounted in the top of the
doseBadge in a shock mount
to reduce the noise
generated from movement
or handling of the case.
The doseBadge is controlled
via an InfraRed link to the
Reader unit. Behind the
InfraRed window are the
transmitter and receiver for
communication with the
Reader.
The charging point for the doseBadge is on the bottom in the centre and this is also
used for the mounting of the doseBadge.
RC:101A Keyfob Remote Control
CR:112A & CR:112AIS doseBadge User Manual
The RC:101A Keyfob Remote control is
designed to start and stop the doseBadge.
The Start and Stop buttons are used to send
commands to the doseBadge. When the Start
or Stop buttons are pressed, the Status
indicator will light to show that the button has
been pressed.
The InfraRed signal is sent from the
transmitter on the front of the Keyfob. Ensure
that this transmitter is kept clean.
If a button is pressed and the Status
Indicator does not show, the battery may
need to be replaced.