Stopping a measurement
At the end of a measurement period, hold the Reader up to the doseBadge as shown
above and press the Stop key.
The Reader will show the status of the communication between the doseBadge and the
Reader on the display.
CR:112A & CR:112AIS doseBadge User Manual
An indicator will flash through the doseBadge window to
indicate the change from Run to Stop. Handling the
doseBadge will now have no affect on the measurements
and so the doseBadge can now be removed from the
wearer.
The doseBadge can also be stopped using the RC:101A
Keyfob Remote Control.
Page 25