Downloading The Measurements To The Reader Unit - Cirrus Research doseBadge CR:112A User Manual

Downloading the measurements to the Reader Un
The doseBadge must be in the Acoustic Calibrator cavity on the Reader before the
measurements are downloaded.
If the Time History Measurement configuration has been set to Off, no Time
History data will be downloaded from the doseBadge. Ensure that the Time
History configuration is set to the required setting before reading
measurement data from the doseBadge.
To download the measurement information from the doseBadge to the Reader, press
the Read key. The Reader will display the status of the communication during the
download period.
The Reader unit downloads the measurement parameters before downloading the Time
History. If there are errors during the download of the Time History data, the Reader
will store the measurement parameters and show the message "Trace Error" at the
bottom of the display.
The measurement data is downloaded automatically from the doseBadge and is then
displayed on the screen of the Reader Unit.
CR:112A & CR:112AIS doseBadge User Manual
it
Page 27