IBM WebSphere DataPower XC10 Installation Manual page 23

J The activity LED light for ETH1 Ethernet interface.
K The CONSOLE connector.
L The network connector to the MGMT Ethernet interface.
M The network connector to the ETH0 Ethernet interface.
N The network connector to the ETH2 Ethernet interface.
O The network connector to the ETH1 Ethernet interface.
P The amber, or error LED indicator light for the cache.
Q The yellow, or writing LED indicator light for the cache.
R The green, or reading LED indicator light for the cache.
CONSOLE connector
The front panel of the WebSphere DataPower XC10 appliance has the CONSOLE
connector. Use the included serial cable to connect the terminal or PC to the
CONSOLE connector on the appliance. If the terminal or PC does not have a serial
port and has only a USB port, then use a USB-to-serial adapter (not included).
Network connectors
The front panel of the WebSphere DataPower XC10 appliance has the following
Ethernet connectors:
MGMT Ethernet connector
This Ethernet interface can manage all transaction data on the appliance.
This connection has an associated activity LED light and speed LED light.
Activity LED light
When illuminated, indicates that traffic is passing through this
connection.
Speed LED light
Indicates Ethernet connection speed and status.
ETH0 Ethernet connector
This Ethernet interface can manage all transaction data on the appliance.
This connection has an associated activity LED light and speed LED light.
Activity LED light
When illuminated, indicates that traffic is passing through this
connection.
Speed LED light
Indicates Ethernet connection speed and status.
ETH1 Ethernet connector
This Ethernet interface can manage all transaction data on the appliance.
ETH2 Ethernet connector
This Ethernet interface can manage all transaction data on the appliance.
LED lights
The front panel of the WebSphere DataPower XC10 appliance has six LED lights:
Power LED light
The green power LED light is illuminated when the appliance is connected
to a power source and the power switch is in the ON position.
3
Chapter 1. Introduction