Cable Seal - Omron i4H User Manual

1 Overview
1-6-12

Cable Seal

The Cable Seal provides ingress protection for the connections and components on the Primary Inter-
face Panel. It includes a cable gland that seals around all cables and must be considered during the
system cable installation procedure.
The Cable Seal Kit part number for a standard robot is 08765-000. The Cable Seal Kit part number for
an inverted robot is 08765-200.
Additional Information
Refer to the following sections for more information.
• A-1 Cable Seal Kit Installation Procedure on page A-2
• 2-1-9 Cable Seal Dimensions on page 2-9
1-26
i4H Robots User's Manual (I660)