PIONEER DJ serato DJM-S5 Instruction Manual page 54

Table of Contents

Slicer Loop mode

A specified range is applied to the track and divided into 8 sections. The divided sections are

assigned to different Performance Pads.

Loop playback of the section assigned to a Performance Pad continues while you press the

Performance Pad.

• You can't use Slicer Loop with a track that doesn't have beatgrid set. For details on how to

set beatgrid, refer to the Serato DJ Pro software manual (page 6).

1 Press the Performance Pad 2 while pressing the [MODE]

button and [SHIFT] button.

The unit switches to Slicer Loop mode.

• The 8 sections of a divided domain are assigned to the Performance Pads as follows:

Sections 1 to 8:

Performance Pad assignment:

When the [PAD 5-8] button light is off:

When the [PAD 5-8] button is lit:

2 Press a Performance Pad assigned with the section you want

to play in a loop.

Loop playback continues while you press the Performance Pad.

Using the Performance Pads

Section

Table of Contents