PIONEER DJ serato DJM-S5 Instruction Manual page 57

Transport mode
You can control a track using the Performance Pads without using a turntable or multi player.
In Transport mode, functions are assigned to the Performance Pads as follows:
When the [PAD 5-8] button light is off:
When the [PAD 5-8] button is lit:
• To use Transport mode, set play mode on the deck to [INT].
1 Press the Performance Pad 4 while pressing the [MODE]
button and [SHIFT] button.
The unit switches to Transport mode.
2 Press a Performance Pad.
— 1/2 : Adjusts the pitch temporarily.
— 3/4 : Adjusts the pitch permanently by nudging the track.
Press Performance Pad 3 or 4 while pressing the [SHIFT] button to reset the key.
— 5 : Turns the key lock function on and off.
When key lock is turned on, the pitch doesn't change – even if the tempo of a
track is changed. In this scenario, sound quality is lowered due to the digital
processing applied.
Press Performance Pad 5 while pressing the [SHIFT] button to switch the Serato
DVS playback mode between the internal mode and relative mode.
— 6 : Turns on the sync function.
Automatically synchronizes the tempo (pitch) of tracks on multiple decks when
the Serato DVS playback mode is set to relative mode.
Automatically synchronizes the tempo and beatgrids of tracks on multiple decks
when the Serato DVS playback mode is set to internal mode.
You can't use the sync function when the Serato DVS playback mode is set to
absolute mode.
Using the Performance Pads
Performance Pad no.
1 2
Pitch Pitch
bend bend
(-) (+)
5 6
Key lock Sync
57
3 4
Pitch Pitch
nudge nudge
(-) (+)
7 8
Temp Play/
cue pause