Scratch Cutter; Using Scratch Cutter - PIONEER DJ serato DJM-S5 Instruction Manual

Scratch Cutter

Using Scratch Cutter

When you turn on Scratch Cutter and use the platters on turntables, or jog wheels on multi
players, to scratch a track, the sound is output from this unit according to the selected cutting
pattern, even if you don't use the crossfader.
1 Press and hold the [FX/CUT] button for more than 1 second.
The unit switches to Scratch Cutter mode and selects the cutting pattern assigned to the
[FX/CUT] button.
• Press and hold the [FX/CUT] button again for more than 1 second to switch to Serato
FX mode. The effect assigned to the [FX/CUT] button will be selected.
2 Press the [FX/CUT] button assigned with the cutting pattern
you want to use.
3 Press the [BEAT
to synchronize the cutting pattern with.
4 Set the effect lever to [ON] or [LOCK ON].
5 Play the control signal (page 24).
6 Move the platter or jog wheel.
] or [BEAT ] button to set the beat fraction
44