PIONEER DJ serato DJM-S5 Instruction Manual page 32

Channel section
TRIM knob
1.
Adjusts the volume for the channel input sound.
Input selector switch
2.
Selects an input sound source.
— [ ] : Selects a PC/Mac connected to the [USB] port.
— [PHONO/LINE] : Selects a turntable or multi player, etc. connected to the [LINE/
PHONO] terminals.
HI, MID, LOW knobs
3.
Adjusts the volume of each frequency band.
Each knob adjusts in the following range.
— [HI]: -∞ dB to +6 dB (ISO)
— [MID]: -∞ dB to +6 dB (ISO)
— [LOW]: -∞ dB to +6 dB (ISO)
Channel fader
4.
Adjusts the volume for the channel output sound according to the channel fader curve set
in the Utility settings (page 68). Moving it up increases the volume, and down decreases
the volume.
Slide up from the bottom position while pressing the [SHIFT] button to trigger Channel
Fader Start (page 61).
Channel level indicator
5.
Displays the volume level before the sound passes through the channel fader.
Crossfader
6.
Adjusts the volume balance between the channel output sounds according to the
crossfader curve set in the Utility settings (page 67). Moving it to the CH1 side outputs
the sound of CH1, and to the CH2 side outputs the sound of CH2.
Slide from either end to the other side while pressing the [SHIFT] button to trigger
Crossfader Start (page 62).
Master section
MASTER LEVEL knob
7.
Adjusts the volume for the master sound.
32
Audio output