Table of Contents
Advertisement
Auto Loop mode
If you press a Performance Pad, a loop is set with the number of beats assigned to the
Performance Pad and loop playback continues even if you release the Performance Pad.
1 Press the Performance Pad 3 while pressing the [MODE]
button.
The unit switches to Auto Loop mode.
2 Press a Performance Pad during playback.
Loop playback starts according to the number of beats assigned to the Performance Pad.
• The number of beats is displayed on the Serato DJ Pro screen.
Example: When set to 1/8 to 16 beats, the numbers of beats are assigned to the
Performance Pads as follows:
When the [PAD 5-8] button light is off:
When the [PAD 5-8] button is lit:
• Press the Performance Pad again to cancel loop playback.
Sampler mode
You can start playback of a track loaded in a Sampler slot using a Performance Pad.
1 Display the [SAMPLER] pane on the Serato DJ Pro screen.
2 Press the Performance Pad 4 while pressing the [MODE]
button.
The unit switches to Sampler mode.
If you display the sampler pane on the Serato DJ Pro screen, you can switch 4 banks (A,
B, C, D).
Using the Performance Pads
2
4
1/8
1/4
49
8
16
1/2
1
Advertisement
Table of Contents
