Advertisement
WHAT'S IN THE BOX
Table 1: Altura MKII+ Theremin MIDI Controller Bill Of Materials (BOM) is a complete parts list of
everything that should be present in your kit, followed by photos of each part. Print the BOM and
carefully go through the kit, identifying every part. Before removing
anything from the silver static-protective bag, please read about the
proper handling of IC's in the paragraph "Integrated Circuits (IC's)"
TIP: Empty
on page 35. Note that some of the components may be difficult
the parts of the kit into a
to tell apart. Compare them carefully with the photos. Besides
bowl, NOT onto the cluttered
verifying that nothing is missing, this will acquaint you with the
workbench, or onto the living
room carpet! This will protect
parts and their names. If ANYTHING is missing, first double-
you from losing tiny parts.
check; we double-checked before sealing the box at our lab! If
it's still missing, EMAIL US right away at info@zeppelindesignlabs.
com. If we goofed and shorted your kit, we will get replacement parts
in the mail to you as soon as possible. If you lose or damage anything, we will be glad to sell you
replacements. The unusual or custom components can be ordered directly from us (contact info@
zeppelindesignlabs.com). For more common parts, like resistors, capacitors, or screws, you may prefer
to go to a local electronics or hardware store.
Figure 2: What's In The Box
6
Advertisement
