Advertisement
b. Attach the pinstripe label to the front (the side without the holes) of the bottom chassis in the
same way as the top label. Line up the label where you want it and then tack down one side
with tape. Peel and cut half the backing. Attach that half of the label. Remove the tape and
do the same thing for the other side.
63
65
c. Use an X-acto knife (or hobby knife) and ruler to cut the vinyl label. Apply the information
label to the bottom of the chassis for ready reference (70). You can place the other parts of
the label around the chassis as you like.
67
69
64
68
70
21
Advertisement
