System Start-Up Information - Oneida Air Systems 5HP High Pressure Dust Collector Owner's Manual

I. System Start-Up Information
The Dust Collector & Fan/Blower is heavy. Handling and
installation should always be performed by experienced and
trained personnel who have experience with rotary equipment.
In addition to the following instructional manual, care should
be taken to ensure compliance with specific safety
requirements mandated by federal, state and local codes.
Do not operate Fan / Blower without connecting ductwork.
Never operate Fan/Blower without belt and shaft guard in
place. Keep clear of exhaust. Keep hands and objects clear
Check amperage draw during operation with all blast gates
open. Make certain amperage is not outside operating limit
indicated on motor plate! If amperage is too high - shut down
immediately! (See Troubleshooting section.)
5HP High Pressure Owner’s Manual
Caution
Warning
of inlet and outlet.
Warning
O.A.S. 2002