Entering The Contractor's Contact Details; Setting The Home Screen; Changing The Colorific Value Or Correction Factor; Switching Internet Access On Or Off - Viessmann VITODENS 200-W B2HE 85 Operating Instructions Manual

Vitodens 200-W B2HE Operating

Entering the Contractor's Contact Details

You can enter your contractor's contact details. These
can then be called up in the

Setting the Home Screen

Note: Not valid for systems with a DHW tank with
temperature switch (such as an Aquastat).
Note: Which default displays are available depends
on the operating mode: Weather-compensated
operation or constant operation.
Changing the Calorific Value or Correction Factor

Switching Internet Access On or Off

You can control your system remotely via the internet
using an app. To do this, establish an internet connection
via WiFi: See the following chapter.
The required credentials for internet access to the control
unit via app can be found on the adjacent label:
Place WiFi label here
"Information" menu.
Tap the following buttons:
1.
2. "Information"
3. "Contractor contact details"
4. Relevant entry field
5. Enter your contractor's contact details into the
individual boxes.
6. to confirm
You can choose from the following default displays as
your home screen:
"Heating circuit" or "Continuous operation"
"DHW"
"Device status"
Tap the following buttons:
1.
2. "Settings"
3. "Selecting the default display"
4. Required display
5. to confirm
Note: Tap to call up the selected home screen.
Tap the following buttons:
1.
2. "Settings"
3. "Energy cockpit"
4. Select "Calorific value" or "Correction factor"
5. Enter the value.
6. to confirm
Note: The value has an effect on the calculated
consumption data. (consumption value not suitable
for billing purposes!)
Switching WiFi on or off
Tap the following buttons:
1.
2. "Settings"
3. "Internet"
4. "WiFi operating mode"
5. "OFF" if you want to switch off the WiFi.
or
"Internet" if you want to switch on the WiFi.
6. to confirm
Additional Adjustments
29