Entering Contact Details For The Heating Contractor - Viessmann VITODENS Operating Instructions Manual

Entering contact details for the heating contractor

You can enter the contact details for your heating con-
tractor. These details can be called up under Informa-
tion.
Tap the following on-screen buttons:
1. "Menu"
2. "Settings"
Permanently selecting the default display
You can select one of the following displays as the
default display:
"Heating"
■
■ "Energy cockpit"
■ "Favourites"
Tap the following on-screen buttons:
1. "Menu"
2. "Settings"
Restoring factory settings
You can individually restore all modified values for
each heating circuit to their factory setting.
Note
If heating circuits have been named (see chapter
"Naming heating circuits") the assigned name is
retained.
Settings and values that are reset:
Set room temperature
■
■ Reduced set room temperature
■ Operating program
■ Set DHW temperature
Time program for central heating
■
Time program for DHW heating
■
■ Time program for DHW circulation pump
■ Heating curve slope and level
■ Comfort and energy saving functions are deleted.
Tap the following on-screen buttons:
1. "Menu"
2. "Settings"
3. "Factory settings"
4. "Heating circuit 1 2 3" for the required heating cir-
cuit
3. "Input, service contact details"
4. Required entry field
5. Enter the text in the individual fields (see page 32).
6. OK to confirm
3. "Selecting the default display"
4. Required display
5. OK to confirm
Note
If you tap , the selected display will appear.
5. OK to confirm
Further adjustments
33