Dashboard" Default Display; "Operating Status" Default Display - Viessmann VITODENS 200-W B2HE 85 Operating Instructions Manual

Default Displays

"Dashboard" Default Display

"Operating Status" Default Display

16
The various components present in the system are shown
as graphics. Some information on the components is also
provided in the default display. For more information, tap
the relevant component.
What buttons and symbols are available depends on the
system version.
Legend
A Operating program
B Current supply temperature
C Solar collectors active
Holiday program active
Current outside temperature
Burner status
D Burner symbol
E Current modulation level
F Solar yield (if active)
G Solar storage tank (if installed)
H Target supply temperature
"Dashboard" default display for cascade control
This display shows the lead boiler in the cascade,
its current supply temperature, the target supply
temperature and the modulation level.
Note: All information in this display relates to the lead
boiler in the cascade system.
Legend
A Dynamic control strategy
B All cascade participants can be called up (status,
burner run hours)
C Switch on all displays of the cascade participants
(deactivated by standby)
This display shows the participants in the cascade as
well as the current supply temperature and the target
supply temperature.
Legend
A Target supply temperature
B Modulation level
C Current temperature
D Identification number of the lead or lag boiler.
This display shows the lead boiler in the cascade, it's
current supply temperature, the target temperature,
the modulation level and the identification number.
Vitodens 200-W B2HE Operating