Energy Cockpit Default Display - Viessmann VITODENS Operating Instructions Manual

Energy cockpit
(cont.)

Energy cockpit default display

The components installed in the system are shown
graphically. Some information regarding the compo-
nents is displayed in the default display. For further
information, tap the relevant system component. Also
see the following chapters.
Fig. 11 Example with Vitodens 300-W
Solar thermal system
A
Call up energy yield (see page 17)
Heat-up condition of the DHW cylinder
B
Display according to type of DHW cylinder
DHW cylinder
C
Call up temperatures and heat-up condition (see
page 18)
Heat generator (boiler)
D
Call up energy situation (see page 19)
Note
The depiction of the heat generator and the DHW cyl-
inder depends on the products used in the system. In
case of heat generators with integral DHW cylinders,
the DHW cylinder is shown inside the heat generator.
Temperature of the solar thermal system
The current temperature of the solar thermal system is
permanently displayed in the energy cockpit default
display.
Energy yield of the solar thermal system
You can call up the energy yield of the solar thermal
system for the last 2 years. The values are displayed
in kilowatt hours.
You can call up the following periods:
■ The last 7 days including the current day
The last 52 weeks including the current week
■
■ The last 12 months including the current month
The last 2 years including the current year
■
Heating of DHW cylinder by the heat generator
E
active (red and animated)
Heating of DHW cylinder by the solar thermal sys-
F
tem active (yellow and animated)
Call up energy statement of the solar thermal sys-
G
tem (see page 18)
1. Use / to call up the energy cockpit from the
standard menu.
2. Tap the collector.
3. Tap the required period.
The energy yields are shown graphically.
Operation
17