Table of Contents
Advertisement
4.
Touch the relevant zone keys again, timer display stop flashing and the
previously selected zone key will show "o" indicating that the setting is ok.
5.
Touch the ON/OFF to switch off. Then switch on and the hob is configured ready
to use at the ECO Mode you set for.
To change the ECO configuration setting
1.
Cut off the power supply to the hob.
2.
Leave the power supply cut off for five minutes.
3.
Switch on the power supply again.
4.
Follow the instructions under "To configure the hob into ECO Mode" from
number "1" onward.
NOTE: The ECO Mode Configuration can be entered only once if the power supply of the hob
is not cut off.
OPERATION TIME LIMIT OF THE COOKING ZONE
Each cooking zone is switched off automatically after a maximum preset time if no
further operation is performed. The maximum preset time limit depends on the set
power level and the default cooking times are shown in the table below:
Power Level
Operation Time Limit
(hour)
Each touch on the control key will reset the maximum operation time as initial
default value.
TIMER FUNCTION
timer can be used in two different ways:
The
As a minute minder. In this case, the timer will not turn any cooking zone off
when the set time is up. It is function as a reminder or alarm.
1
2
3
8
8
8
4
5
6
4
4
4
7
8
9
2
2
2
5
P
min
Advertisement
Table of Contents
