Table of Contents
Advertisement
TO START COOKING
Turn on the main power supply, the buzzer beeps once and all the indicators light up
for 1 second then goes off, indicating that the hob has entered the state of standby
mode.
Touch the ON/OFF
1.
Place a suitable pan on the desired cooking zone.
(Make sure the bottom of the pan and the surface
of the cooking zone is clean and dry.)
2.
Select the cooking zone by touching the relevant heating zone.
The indicator next to the selected zone will flash. The default power
level setting is 5.
3.
Select a heat setting by touching the slider control (between
minimum "1" and maximum "P") – slide your finger along the
selector or touch at one point to "jump" to a specific setting.
The power level display will show the selected level. You can
modify the heat setting at any time during cooking.
Note: If a cooking zone is not turned on within 1 minute, the induction hob will automatically
switch off. You will need to start again at step 1.
TO END COOKING
1.
Select the desired heating zone
OPERATION
key. All the indicators show "- "
Advertisement
Table of Contents
