Table of Contents
Advertisement
WARNING Never let the hob operates on 3.6/6.0/7.2kW mode with pre-assembly 13Amp
cable & plug. Exceeding power consumption will blow the fuse and may damage the hob &
causing other issues
To configure the hob into ECO Mode
1.
Touch ON/OFF key to switch on the power supply. The buzzer beeps once, all
displays show "– "and "– – ", indicating that the hob has entered the state of
standby mode.
2.
Touch front left zone key and rear left zone key simultaneously for 3 seconds.
The buzzer beeps indicating that the induction hob enters selection of ECO
Mode. Then the timer indicator will show "EC" for seconds, and it will turn to
show the current default power.
3.
Touch the relevant zone keys and the number (e.g.72) show in the display
indicating that the total power will set to relevant ECO power settings:
Selection Key
Front left zone key
Rear left zone key
Rear right zone key
Front right zone key
* Default power setting is 2.8kW (13Amp)..
Timer Display
28
36
60
72
ECO power level
2.8kW
3.6kW
6.0kW
7.2kW
Power supply (Fuse
protection required)
13Amp (BS plug available)*
16Amp
25Amp
32Amp
Advertisement
Table of Contents
