EF HB BI 584 FA User Manual page 16

ECO MODE CONFIGURATION INSTRUCTION
IMPORTANT: PART FOR QUALIFIED INSTALLERS ONLY.
ECO Mode Configuration
This hob can be connected to a 13, 16, 25 or 32Amp supply and configured to work
on any of these power settings.
The hob is preset to be connected to a 13Amp supply, all four zones are selected at
the same time the hob will limit the maximum power consumed so that the 2.8kW
power supply cannot be exceeded. In a similar way, when the hob is connected and
configured to a 16/25Amp supply, the hob will limit the maximum power at
3.6/6.0kW. So you need to change the cable, please prepare the extra cable that is
conformed to IEC standard.
If, however, the hob is connected and configured to a 32Amp power supply, all four
zones can be used on the maximum setting with boost.
To change the cable before configuring ECO Mode
1. Turn the cooktop upside down and put the glass side on a stable smooth surface
(using the packaging).
2. Remove the screw and lift the top cover up.
3. Replace the preset 13Amp cable by qualified 32A cable. (Refer to "Connecting
the hob to the mains power supply" in Installation Manual.)