EF HB BI 584 FA User Manual page 12

FLEXIBLE ZONE FUNCTION
The zone may be used as a single zone or two individual zones depending on the

cooking needs in each situation.
It is made of four independent inductors that can be controlled separately.

When the flexible zone is selected, only the zone covered by the cookware is
activated (pan detection function).
Advice on using cookware
To ensure that the cookware is detected and the heat is distributed evenly,

correctly place the cookware at the center of the zone
To use as single zone, select the symbol " " on the left or right zone
Single Zone
Cookware bottom diameter is larger than 11cm
Place the cookware in one of the four positions
shown in the left figure.
Cookware bottom diameter is greater than 16cm
Place the cookware in one of the three positions
shown in the left figure.
Warning: The center of cookware must be aligned
between two inductors!
Cookware bottom diameter is greater than 28cm
If the cookware takes up more than one inductors,
please it starts on the upper or lower edge of the
flexible cooking zone.