Usb Loading - Lilliput RM-503S Manual

7-2-4. Click Output File, choose the file name.
7-2-5. Click Generate Lut button to finish.

7-3. USB Loading

Copy the needed files to the root directory of the USB flash disk.
Note! LUT files after conversion must be named "User1", "User2", "User3", "User4", "User5" or
"User6".
Plug the USB flash disk into USB port of the device after power on. Click "Yes" on the pop-up prompt
window (If the device doesn't pop-up the prompt window, please check if the LUT document name
or the USB flash disk version meets monitor's requirement.), then press Menu button to update
automatically. It will pop-up a prompt message if the update completed.
25