Lin Interface - Renesas R8C/Tiny Series User Manual

The Reset circuit operates by latching the state of the boot switch on pressing the reset button. This control is subsequently used to
modify the mode pin states as required.
The MODE pin should change state only while the reset signal is active to avoid possible device damage.
The reset is held in the active state for a fixed period by a pair of resistors and a capacitor. Please check the reset requirements carefully
to ensure the reset circuit on the customers' board meets all the reset timing requirements.

6.9. LIN Interface

This Renesas Starter Kit has hardware LIN interface. The interface is available on connector 'LIN'. The connector 'J5' functions as power
connector for LIN. The device can be operated either in 'Master' mode or 'Slave' mode. The device performs LIN communication in
cooperation with Timer RA and UART0.
For more details on LIN interface please refer to R8C/2C Group, R8C/2D Group Hardware Manual.
12