Download Print this page
EarthWay 2170 Assembly And Operating Instructions Manual

EarthWay 2170 Assembly And Operating Instructions Manual

Broadcast spreader

Advertisement

Quick Links

2170 C
ommerCial
B
roadCast
ASSEMBLY and OPERATING INSTRUCTIONS
PLEASE CALL IF YOU ARE MISSING ANY PARTS, HAVE ANY DIFFICULTY IN ASSEMBLY, OR HAVE ANY QUESTIONS
REGARDING THE SAFE OPERATION OF THIS SPREADER. THIS MODEL INCLUDES LIFETIME TECHNICAL SUPPORT
SUPPORT HOT LINE: 574-848-7491 or 800-294-0671,
HELPFUL HINTS:
; If your spreader does not spread evenly, be sure the FRONT on the gear box points to the front of the spreader. The
impeller must turn clockwise. Reversing the gearbox will cause the impeller to turn counter clockwise. Clean the impeller
plate after each use. Fertilizer stuck on the impeller blades will cause uneven spreading.
; Your spreader is designed to be pushed at three miles per hour, which is a brisk walking speed. Slower or faster speeds
will change the spread patterns. Wet fertilizer will also change the spread pattern and flow rate. Clean and dry your
spreader thoroughly after each use. A coating of light spray oil on all metal parts inside & out will help prevent corrosion.
Wash between the shut off plate and bottom of the hopper. Do not use powdered materials.
; Gears are permanently lubricated at the factory. Do not open the gearbox or dirt may enter.
33117
32100
Qty 1
Qty 2
36210
Qty 2
36214
31100
Qty 4
Qty 4
12152
12148
Qty 2
Qty 2
1. Remove and identify all loose parts from carton
(Qty 4 #36214)
1/4-20 X 1-1/2"
Phillips Panhead
s
preader
READ THE DIRECTIONS BEFORE ASSEMBLY
36300
32103
Qty 6
Qty 9
33108
36105
Qty 1
Qty 1
33109
Qty 1
31120
Qty 5
31106
Qty 2
.
(Qty 4 #36300)
1/4-20 SS Locknut
:
@
email
teChsupport
earthway
r
s
oCk
alt and
should not Be used in this spreader as
it will damage gearBox and Can void
u
se only granular materials
13
16
31
2. Position hopper on side. Install frame using (4) 1/4-20 x 1-1/2" Pan
Head Phillips bolts and (4) 1/4-20 nylon insert locknuts. First put bolts
through holes in frame then through holes in bottom of hopper. Secure
with locknuts. TIGHTEN THESE LOCKNUTS NOW - DO NOT
TIGHTEN WITH POWER TOOLS.
EarthWay
EarthWay
EV-N-SPRED
EV-N-SPRED
GT
GT
Rev. 3-10
.
SKYPE: EARTHWAY.TECH
Com
p
owdered materials
.
warranty
24
23
17
28
25
26
Pt# 52164
®
®
.
12
11
9
PAGE 1

Advertisement

loading

Summary of Contents for EarthWay 2170

  • Page 1 EarthWay EarthWay 2170 C ommerCial ® ® EV-N-SPRED EV-N-SPRED roadCast preader ASSEMBLY and OPERATING INSTRUCTIONS Rev. 3-10 PLEASE CALL IF YOU ARE MISSING ANY PARTS, HAVE ANY DIFFICULTY IN ASSEMBLY, OR HAVE ANY QUESTIONS REGARDING THE SAFE OPERATION OF THIS SPREADER. THIS MODEL INCLUDES LIFETIME TECHNICAL SUPPORT SUPPORT HOT LINE: 574-848-7491 or 800-294-0671, SKYPE: EARTHWAY.TECH...
  • Page 2 Pinion Shaft 1/8 x 1-1/4” Impeller Cotter Pin (#36105) DRIVE WHEEL Cross Brace HOLE Gearbox Brace COAST WHEEL HOLE Gearbox & Axle Assembly 3. Install impeller onto pinion shaft. Insert 1/8”x 1¼” cotter pin through impeller then through pinion shaft. Use hole closest to the gear box.
  • Page 3 2” Cotter Pin 1” Cotter Pin Lower Gearbox Handle Axle Assembly Frame Brace Cross Brace 7. Slide axle bushing over axle and into axle bearing to both sides as shown. 8. Install drive wheel onto the axle and align with the cotter pin hole nearest to lower handles as shown.
  • Page 4: Tools Only

    13. Install handle shaft to lower handles and pivot & bracket assembly as shown. Using 1/4 -20 x 2” bolts and locknuts. TIGHTEN BOLTS AND NUTS NOW. 1/4 - 20 Lock-nut Pivot Bracket 1/4 - 20 x 2” Bolt 14. Install (1) 1/4-20 Hex nut (not a locknut) on to Long End control rod as shown.
  • Page 5: How To Order Spare Parts

    All spare parts listed herein may be ordered direct from the manufacturer. Be sure to give the following information when ordering. ; Model Number ; Part Number ; Part Description You can contact us by calling (574) 848-7491 or 800-294-0671 to place an order with a credit card. Questions? Parts@earthway.com PAGE 5...
  • Page 6 EarthWay Products, Inc. P.O. Box 547 Bristol, IN 46507 Phone: 800-294-0671 77002 www.earthway.com OPTIONAL Heavy-Duty Rain Cover 60060R OPTIONAL Heavy-Duty Rain Cover & Side Deflector Kit 60166R OPTIONAL 3-Side Salt Deflector Kit Standard Settings (12196) Gauge Overlay and OPTIONAL Lesco Settings (12195) Gauge Overlay...