Table of Contents
Advertisement
(2) Test Print for Assembly Process
Power OFF
< 1 > D I A G .
< 2 > P A R A M E T E R
< 3 > A D J U S T
< 4 > T E S T
P R I N T
C O N D I T I O N
A U T O
P R I N T ( R E F L )
A U T O
P R I N T ( R E F L )
A U T O
P R I N T ( R E F L )
< 4 > T E S T
[FEED] [PAUSE]
V 1 . 0 A
[FEED]
S E T
[FEED]
S E T
[FEED]
P R I N T
[PAUSE]
[RESTART]
[PAUSE]
[PAUSE]
[PAUSE]
P R I N T
[PAUSE]
- 63 -
(1) Power off state
(2) While
pressing
[PAUSE] keys, turn the power on.
(3) System mode menu display
(Self-test)
(4) Press the [FEED] key.
(5) System mode menu display
(Parameter setting)
(6) Press the [FEED] key.
(7) System mode menu display
(Fine adjustment value setting)
(8) Press the [FEED] key.
(9) System mode menu display
(Test print)
(10) Press the [PAUSE] key.
(11) Test print condition setting mode
(12) Press the [RESTART] key.
(13) Assembly process automatic printout
mode (Reflective sensor)
(14) Press the [PAUSE] key.
One label feed
3-dot slant line: 5 labels are printed.
(15) Assembly process automatic printout
mode (Reflective sensor)
(16) Press the [PAUSE] key.
(Bar code: 5 labels are printed.)
(17) Assembly process automatic printout
mode (Reflective sensor)
(18) Press the [PAUSE] key.
(Character: 5 labels are printed.)
(19) System mode menu display
(Test print)
(20) Press the [PAUSE] key.
the
[FEED]
and
Advertisement
Table of Contents
