Dumping Of Receive Buffer; Operation Example Of Receive Buffer Dumping - Toshiba TEC B-850 Series Key Operation Specification

5.9 DUMPING OF RECEIVE BUFFER

5.9.1

Operation Example of Receive Buffer Dumping

O N L I N E
P A U S E
< 1 > R E S E T
< 2 > P A R A M E T E R
< 3 > A D J U S T
< 4 > D U M P
B U F F E R
N O W
< 4 > D U M P
Selection of receive buffer (BUFFER)
RESTART
FEED
Power ON
[PAUSE]
[RESTART]
[FEED]
[FEED]
S E T
[FEED]
M O D E
[PAUSE]
R S - 2 3 2 C
[PAUSE]
P R I N T I N G . . .
M O D E
• RS-232C
• CENTRO.
• NETWORK
• BASIC1
• BASIC2
(1) Idling or printing normally
(2) Press the [PAUSE] key.
* When the [PAUSE] key is pressed
5 2
(3) Hold down the [RESTART] key for 3
seconds or more while the printer is in a
pause state.
(4) The reset menu is displayed.
(5) Press the [FEED] key.
(6) The parameter setting menu is
S E T
displayed.
(7) Press the [FEED] key.
(8) The fine adjustment value setting menu
is displayed.
(9) Press the [FEED] key.
(10) The receive buffer dumping menu is
displayed.
(11) Press the [PAUSE] key.
(12) Selection mode display for receive
buffer to be dumped:
Select the receive buffer to be dumped
using the [FEED] and [RESTART] keys.
(13) Press the [PAUSE] key.
(14) Start of printing the receive buffer data
(15) After printing is completed, the display
is returned to the receive buffer
dumping menu.
RS-232C receive buffer
Centronics receive buffer
Network I/F receive buffer
Buffer between the BASIC interpreter I/F and the Interpreter
Buffer between the BASIC interpreter and the printer
- 17 -
during printing, this
displayed and printing is stopped.
message is