Toshiba TEC B-850 Series Key Operation Specification page 18

T O N E A D J . < T >
T O N E A D J . < D >
R B N A D J
R B N A D J
T H R E S H O L D < R > 1 . 0 V
T H R E S H O L D < T > 0 . 7 V
< 3 > A D J U S T
< 2 > P A R A M E T E R
< 1 > R E S E T
O N L I N E
+ 3
[PAUSE]
+ 5
[PAUSE]
< F W > - 1 0
[PAUSE]
< B K > - 5
[PAUSE]
[PAUSE]
[PAUSE]
S E T
[RESTART]
S E T
[RESTART]
[PAUSE]
- 15 -
(18) Print density fine adjustment (Thermal
transfer print mode):
Set the fine adjustment value using the
[FEED] and [RESTART] keys.
(19) Press the [PAUSE] key.
(20) Print density fine adjustment (Direct
thermal print mode):
Set the fine adjustment value using the
[FEED] and [RESTART] keys.
(21) Press the [PAUSE] key.
(22) Ribbon motor
adjustment (Rewind):
Set the fine adjustment value using the
[FEED] and [RESTART] keys.
(23) Press the [PAUSE] key.
(24) Ribbon motor
adjustment (Back tension):
Set the fine adjustment value using the
[FEED] and [RESTART] keys.
(25) Press the [PAUSE] key.
(26) Lower reflective
threshold fine adjustment:
Set the fine adjustment value using the
[FEED] and [RESTART] keys.
(27) Press the [PAUSE] key.
(28) Transmissive sensor manual threshold
fine adjustment:
Set the fine adjustment value using the
[FEED] and [RESTART] keys.
(29) Press the [PAUSE] key.
(30) The fine adjustment value setting menu
is displayed.
(31) Press the [RESTART] key.
(32) The parameter
displayed.
(33) Press the [RESTART] key.
(34) The reset menu is displayed.
(35) Press the [PAUSE] key.
(36) The printer is in the usual initial state.
drive voltage fine
drive voltage fine
sensor manual
setting menu is