5.1 Inspection Cycle
Category
General Checklist
Check the instrument and the
power connection
Check the damage of the power
cord
Cleanness of external part
Cleanness of internal part
Cleanness of accessories
System (Control) Related
Checklist
Automatic tuning
Temperature calibration
Check the temperature offset
value
Actual temperature/ displaying
temperature Calibration
Check temperature setting value
Check function of controller
Electric wire related checklist
Defects if electric wire
Check contamination of electric
wire
Check fixation of wiring
connection part
•
Before using the instrument, please check if there is any other foreign material inside the
chamber, and keep it clean.
•
Be careful not to damage accessories or systems inside the instrument.
•
Be careful not to contact the main body with high concentrations of nitric acid, sulfuric acid,
sodium hydroxide or corrosive solvents such as acetone, benzene, phenol, toluene,
chloroform, crezol, acetic acid, chloroform. Before using the instrument, please check if
there is any other foreign material inside the chamber, and keep it clean.
52412Mechnicaloven_ver_1.0
Inspection Timetable
Daily
Weekly
Monthly
●
●
●
●
●
●
Quarterly
Yearly
●
●
●
●
●
●
●
59