Structure - Cole Parmer OVF-800 Series User Manual

2.3 Structure

(1) Main body
The main body is made of iron plate and painted with coatings.
(2) Exhaust vent
It is an outlet for letting the air exhaust from the chamber. If you would like to adjust the amount of
air to be exhausted, please turn the vent hole cover.
(3) Controller
Various controllers and electrical components are embedded in the instrument.
52412Mechnicaloven_ver_1.0
• Since the instrument is in excessive heat, please wear gloves when controlling the vent
hole cover. If you use wet gloves, it can cause burns on the hands, since it speeds up the
temperature conduction of the high-temperature part.
• When a short circuit occurs due to aging of the device, never wear wet gloves or bare
hands, since the operator can be electrocuted.
19