Alarm Display And Pop-Up Notification Function - Cole Parmer OVF-800 Series User Manual

4.5.3

Alarm Display and Pop-up Notification Function

This device provides Alarm Display function as shown in the table below for various states of the device.
In addition, if a problem occurs with the device during the system use, the following pop-up windows are
provided to give information on problem solving. Check the notification message and please contact a
service center referring to 8.4 Service Contact.
Alarm Display Image
52412Mechnicaloven_ver_1.0
Alarm displays when the actual temperature is higher than
the target temperature + allowable upper limit temperature
Alarm displays when the actual temperature is lower than
the target temperature – allowable lower limit temperature
Alarm displays when the temperature is over the absolute
upper limit temperature that the device set
Alarm displays when there is a problem with the heater or
SSR
Alarm displays when the temperature of the device is
higher than the temperature set in Over Temp Limit.
Alarm displays when the door is open.
Alarm displays when the door opens longer than the Door
Open Alarm Delay time.
Alarm displays when there is a problem with the
temperature sensor.
Alarm displays when there is a problem in the temperature
detection circuit.
Contents
56