Cole Parmer OVF-800 Series User Manual page 13

Ensure that the height of the installation site is less than 2,000 meters above the sea level.
-
Install the instrument on a solid and flat floor in a laboratory facilitated with safety equipment.
-
The door opens up to 115° to the left, so sufficient space should be considered when installing the
-
instrument.
4) Operating and Transfer Instructions
Do NOT place explosive, flammable, combustible or oxidizable chemicals such as alcohol, benzene,
-
gasoline, etc. on top of the instrument, store them or operate them inside the oven. There is a risk of
fire, since the instrument is not a explosion proof structure.
Do NOT place liquid containers on the instrument. Leakage of liquid may cause damage to the
-
instrument.
Do NOT allow moisture, organic solvents, dust, and corrosive gases into the operating parts and
-
inside of the instrument.
Do NOT use the instrument if it makes strange sounds, smells or smoke.
-
Do NOT operate damaged or short-circuit equipment.
-
Do NOT move the instrument when the power cord is connected or when the instrument is operating.
-
5) Repair and Modification
Do NOT disassemble or modify the instrument at any time other than those described in this user
-
manual.
When handling electrical components inside the instrument, only qualified personnel should handle
-
them.
Avoid direct sunlight.
Beware of fire.
52412Mechnicaloven_ver_1.0
Beware of corrosive
materials.
Avoid contact with toxic
chemical to the inside of
the instrument.
Avoid water.
Do not disassemble
deliberately.
Beware of electrical
shocks.
Do not put flammable
dust inside the device.
13