Preparations Before Installation; Installation Condition - Cole Parmer OVF-800 Series User Manual

3.2 Preparations before installation

Installation Condition

3.2.1
Please follow the install guidelines between for your safety.
• Do not install any gas pipe or water pipe around the instrument.
• Do not install in places with a risk of high humidity, short circuits, leaks, or flooding.
• If moisture or organic solvents flow into the control panel, short circuit may be occurred.
• Do not install the instrument in a place with a possibility of flammable gas leakage.
• Do not use or store flammable dust, combustible gas around this instrument.
• Operation of the device is prohibited in a place with a possibility of explosion due to
organic evaporation gas.
• Do not use the device in places with industrial harmful gases, fumes, or metal dust.
•Do not expose the instrument to direct heat sources or direct sunlight.
• Maintain the temperature around the device at 5°C to 40°C.
(The optimal temperature is 25℃.)
• Please keep the relative humidity below 80%.
• Install the device in a place below 2,000m above sea level.
52412Mechnicaloven_ver_1.0
• Do not install near instrument that generates strong high-frequency noise (high-
frequency welding machine, high-frequency sewing machine, large-capacity SCR
control).
• Please beware of using artificial heart pulses or magnetic data devices which
may be affected by magnetic bars.
• Do not install any electrical instrument near the power terminals.
• Do not avoid unventilated corner. If ventilation is not sufficiently performed, heat
dissipation will be in a risk of damage due to overheating.
• The instrument should be installed near the power outlet.
25