4.4.5 Password
The initial value is set to '0000'.
Enter the desired password and press the back button
4.4.6 Factory Default
It is a function that initializes all values in the device at once.
If you press the reset button, a pop-up notification appears and confirms whether or not to proceed
with Factory Default.
This function initializes all settings changed in the Basic Settings, General Settings, and System
Settings into the Factory Default values. When performing Factory Default, please be careful that all
the values such as Auto Tuning and Temperature Calibration in the System Settings and General
Settings are initialized.
52412Mechnicaloven_ver_1.0
to complete the saving.
54